PoE Svičevi

  • Tenda TEF1105P LAN 5-Port 10/100 POE Switch

    Standard&ProtocolIEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
    Interface5*10/100Mbps auto-negotiation ports, port1 to port4 support IEEE802.3 at/af PoE standard
    Network Media10BASE-TX: UTP category 5, 5e cable (?250m)
    100BASE-TX: UTP category 5, 5e cable (?150m)
    Forwarding Mode10BASE-T: 14880pps/port
    100BASE-TX: 148800pps/port
    Backbound Bandwidth1Gbps
    MAC Address Table1K
    transmission modeStore-And-Forward
    Indicator5*Link/Act , 4*PoE Status, 1*Power,1* 100Mbps
    Input PowerExternal Power Supply: DC: 51V/1.25A
    Consumption2 Watts (max. no PD connected)
    63 Watts (max. with 58W PD connected)
    PoE Total Power58W
    Temperature-10oC ~ 45oC
    Humidity10%-90%RH (non-condensing)

  • Tenda TEF1109P-8-63W LAN 9-Port 10/100 POE Switch

    TEF1109P-8-63W Up to 250 meters long distance transmission, beyond hundred meters transfer limit.6KV lighting protection PoE switch is the real monitoring private switch .Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides 30W maximum PoE output a single port and 58W the whole device.
    Standard&Protocol: IEEE 802.3? IEEE 802.3u?IEEE 802.3x?IEEE802.3ab?IEEE 802.3af?IEEE 802.3at
    MTBF: ?50,000 hours(about 5 years)
    Indicator: Link/Act, PoE Status, Power, 100M
    Fixed Port: 8 10/100Base-TX RJ45 Ports(Data/Power)
    1 10/100Base-TX RJ45 Port(Data)
    Lightning Protection: 6KV
    Wire-speed forwarding: Support
    Switching Capacity: 1.8 Gbit/s
    MAC Address Table: 4K MAC
    PoE supply management: Port 1 to Port 8 support standard IEEE802.3at/af power( maximum power for each port is 30W),PoE power type is end-span(1245+, 3678- line pair)
    in full configuration:<63W
    PoE Max Power Supply:58W
    Dimension: 177.5mm*104mm*26mm (W × D × H)
    Input Voltage AC:100-240V~ 50/60Hz
    DC:51V /1.25A (Power Adapter )
    Environment: Operating Temperature: 0?~40? (32?~104?)
    Storage Temperature: -40?~70? (-40?~158?)
    Operating Humidity: 10%~90% non-condensing
    Storage Humidity: 5%~90% non-condensing
    One-key ModeDefault Mode: If Default mode is enabled, the device works as a general switch and all ports support 10/100Mbps auto-negotiation.
    Extend Mode: If Extend mode is enabled, VLAN isolation is enabled. Port 1-4 will be isolated respectively (10Mbps auto-negotiation), but can communicate with the Uplink port. And the delivery distance of powering and network data is up to 250m (10Mbps).
    Certification: 3C FCC CE RHOS

  • Tenda TEF1118P-16-150W LAN 16-Port 10/100M + 1 Gigabit SFP Slots Switch

    TEF1118P-16-150W is a Tenda PoE switch that offers 16 10/100 Mbps Base-TX RJ45 ports, 1 10/100/1000 Mbps Base-T RJ45 ports, and 1 1000 Mbps Base-X SFP port. Ports 1-16 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 135 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and Extend to help reduce cabling costs of IP terminals like APs and IP cameras.

    Standard&Protocol IEEE 802.3? IEEE 802.3u?IEEE 802.3x?IEEE 802.3af
    Indicator 16*Link/Act per device
    1*G1 Link/Act per device
    1*SFP Link/Act per device
    1*PoE-MAX per device
    1*Power per device
    Interface 16 10/100Base-TX ports(Data/Power)
    1 10/100/1000Base-T port(Data)
    1 1000Base-X SFP port
    Lightning Protection 6KV
    Store & Forward Yes
    exchange capacity 7.2 Gbit/s
    Packet Forwarding Rate5.36Mpps
    MAC Address Table 4K
    PoE supply management Port 1 to Port 16 support IEEE802.3at/af POE standard
    PN pass-through 1 2 4 5 +,3 6 7 8 –
    Input PowerAC:100-240V~ 50/60Hz
    Dimension 294*178*44mm( W x D x H )
    Power Consumptionin full configuration:<150W
    PoE Max Power Supply:135W
    Ports featureCCTV: 1-8 ports based CoS, If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device to which the monitoring computer connects. This ensures smoother monitoring video playback.
    Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.
    VLAN: In this mode,1-16 ports of the switch cannot communicate with each other, but can communicate with the G1 and SFP1 ports.Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing.
    Extend: In this mode, the data rate of 1-8 port of the switch is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each other.
    Environment Operating Temperature: 0?~40? (32?~104?)
    Storage Temperature: -40?~70? (-40?~158?)
    Operating Humidity: 10%~90% non-condensing
    Storage Humidity: 5%~90% non-condensing